BXRZ-40 explosion-proof heater
Delivery time 30days
LFS
BXRZ-30 / 40/50/70/100 explosion-proof fresh air heater unit can be installed on the wall structure. It can also be installed on the structural parts of the ceiling. 2. Check the integrity of the heater before installation. 3. The condensate drain pipe of the heater should be equipped with a condensate drain. 4. The motor wiring should make the fan impeller rotate in the direction indicated by the rotation label. 5. Before reusing the heater, you should carefully check the tightening of the connection, and if it is loose, you should tighten it immediately. 6. Before each work of the heater, the mixed gas in the heat exchange gas should be drained out. The fresh air explosion-proof heating heater unit should be preheated for 5-10 minutes before supplying air. 7. After the heater stops working, the condensate in the radiator should be quiescent. 8. The fan heater must be kept clean, and compressed air can be used to blow off the dust of the heat exchanger fins and other parts. 9. After 2-3 years of heater operation, the fresh air explosion-proof heating heater group equipment should immediately clean the inner cavity of the water pipe of the heat exchanger. Dezhou Yujie fresh air explosion-proof heating heater group can be used to remove scale. 10. The new heater can also produce explosion-proof heaters according to user requirements.
The BXRZ explosion-proof fresh air heater unit produced by Yujie Air Conditioner is composed of an air heater and an axial fan. It can rapidly cool and heat indoor air or outdoor fresh air through various heat media (hot water, steam, electricity as the HVAC terminal device to enhance the air circulation. It is currently a relatively advanced heating equipment for industrial and mining enterprises in China and can be widely used In the production workshops and large buildings of industrial and mining enterprises, it can be installed on the side or on the ceiling as required.
