CLHAD-8 Regenerative adsorption dryer

Model: CLHAD-8
Capacity: 8.5Nm3 / min
Power supply voltage: 110V / 60Hz
Working pressure: 0.7MPa (use range 0.4 ~ 1.0MPa)
Intake temperature: ≤40 ℃
Intake oil content: <0.1mg / m3
Pressure loss: ≤0.02MPa
Pressure dew point: ≤-40 ° C
Outlet air particle size: ≤1μm
Regenerative gas consumption: 12 ~ 15% of rated capacity
Regeneration method: no heat regeneration
Adsorbent: activated alumina
Working mode: Two towers work automatically and continuously alternately
Installation environment: indoor without foundation installation
Noise sound pressure level: noise (short-term) is less than 75dB (A)
Takeover caliber: R2 "


Achievable compressed air quality
Pressure dew point: -40 ℃
Oil content of outlet air: ≤0.01ppm
Outlet air particle size: ≤1μm
  1. Explosion-proof non-thermal regeneration adsorption dryer, explosion-proof grade is BT4 (valves, electronic control parts)
  2. Power supply voltage: 110V / 60Hz
  3. Maximum load: 1.26MPa