HTB18-P4A2BAD04

HCM

HTB18-P4A2BAD04

Delivery time：8-10 weeks

• Device type	Photoelectric sensors
  Dimensions (W x H x D)	16.2 mm x 48.5 mm x 31.8 mm
  Housing design (light emission)	Hybrid
  Thread diameter (housing)	M18
  Mounting system type	M18, nose / side (24.1 … 25.4 mm)
  Housing color	Blue
  Sensing range max.	5 mm ... 300 mm 1)
  Sensing range	5 mm ... 150 mm 2)
  Type of light	Visible red light
  Light source	PinPoint LED 3)
  Light spot size (distance)	7 mm (300 mm)
  Wave length	631 nm
  Adjustment Potentiometer, right None Potentiometer, left None
  Special features	Signal strength light bar Sensing range pre-set: 100 mm

  • 1) Object with 90% remission (based on standard white, DIN 5033).
  • 2) Object with 6 % reflectance (referred to standard black, DIN 5033).
  • 3) Average service life: 100,000 h at TU = +25 °C.

• Mechanics/electronics

  Supply voltage	10 V DC ... 30 V DC
  Ripple	< 5 Vpp 1)
  Current consumption	≤ 20 mA 2)
  Switching output	PNP
  Output function	Complementary
  Switching mode	Light/dark switching
  Switching output detail Switching output Q1 PNP, Light switching Switching output Q2 PNP, Dark switching
  Output current Imax.	≤ 100 mA
  Response time	≤ 0.5 ms 3)
  Switching frequency	1,000 Hz 4)
  Connection type	Male connector M12, 4-pin
  Circuit protection	A 5) B 6) D 7)
  Protection class	III
  Weight	18 g
  Housing material	Plastic, VISTAL®
  Optics material	Plastic, PMMA
  Enclosure rating	IP67 IP69K
  Items supplied	Mounting nut (1x), M18, plastic, black, flat
  Electromagnetic compatibility (EMC)	EN 60947-5-2 (The sensor complies with the Radio Safety Requirements (EMC) for the industrial sector (Radio Safety Class A). It may cause radio interference if used in a residential area.)
  Ambient operating temperature	–40 °C ... +65 °C
  Ambient temperature, storage	–40 °C ... +75 °C
  UL File No.	E189383

  • 1) May not exceed or fall below Uv tolerances.
  • 2) Without signal strength light bar and load.
  • 3) Signal transit time with resistive load.
  • 4) With light/dark ratio 1:1.
  • 5) A = VS connections reverse-polarity protected.
  • 6) B = inputs and output reverse-polarity protected.
  • 7) D = outputs overcurrent and short-circuit protected.