HCM
ATS48C21Q
Delivery time:in stock
	
	
		
				 
			
					range of product
				 
				
					Altistart 48
				 
			
				 
			
					Product or component type
				 
				
					Soft starter
				 
			
				 
			
					Product destination
				 
				
					Asynchronous motors
				 
			
				 
			
					Product specific application
				 
				
					Heavy duty industry and pumps
				 
			
				 
			
					Device short name
				 
				
					ATS48
				 
			
				 
			
					Utilisation category
				 
				
					AC-53A
				 
			
				 
			
					Ue power supply voltage
				 
				
					230...415 V - 15...10 %
				 
			
				 
			
					power supply frequency
				 
				
					50...60 Hz - 5...5 %
				 
			
				 
		
	
					Motor power kW
				 
				
					55 kW at 230 V connection in the motor supply line for standard applications 
			
90 kW at 230 V connection to the motor delta terminals for severe applications
90 kW at 400 V connection in the motor supply line for severe applications
110 kW at 230 V connection to the motor delta terminals for standard applications
110 kW at 400 V connection in the motor supply line for standard applications
132 kW at 400 V connection to the motor delta terminals for severe applications
160 kW at 400 V connection to the motor delta terminals for standard applications
45 kW at 230 V connection in the motor supply line for severe applications
				
		
				 
			
					Device connection
				 
				
					To the motor delta terminals 
			
In the motor supply line
				
				 
			
					Protection type
				 
				
					Phase failure: line 
			
Thermal protection: motor
Thermal protection: starter
				
				 
			
					standards
				 
				
					EN/IEC 60947-4-2
				 
			
				 
			
					Product certifications
				 
				
					GOST 
			
SEPRO
CSA
C-Tick
NOM 117
TCF
UL
CCC
DNV
				
				 
			
					Marking
				 
				
					CE
				 
			
				 
			
					Discrete input number
				 
				
					5
				 
			
				 
			
					Discrete input type
				 
				
					PTC, 750 Ohm at 25 °C 
			
(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm
				
				 
			
					Discrete input logic
				 
				
					Positive logic Stop, Run, LI3, LI4 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA
				 
			
				 
			
					Minimum switching current
				 
				
					10 mA at 6 V DC for relay outputs
				 
			
				 
			
					Discrete output number
				 
				
					2
				 
			
				 
			
					Discrete output type
				 
				
					(LO1) logic output 0 V common configurable 
			
(LO2) logic output 0 V common configurable
(R1) relay outputs fault relay NO
(R2) relay outputs end of starting relay NO
(R3) relay outputs motor powered NO
				
				 
			
					Analogue output type
				 
				
					Current output AO: 0-20 mA or 4-20 mA, impedance <500 Ohm
				 
			
				 
			
					communication port protocol
				 
				
					Modbus
				 
			
				 
			
					Connector type
				 
				
					1 RJ45
				 
			
				 
			
					Communication data link
				 
				
					Serial
				 
			
				 
			
					physical interface
				 
				
					RS485 multidrop
				 
			
				 
			
					Transmission rate
				 
				
					4800, 9600 or 19200 bps
				 
			
				 
			
					Function available
				 
				
					External bypass (optional)
				 
			
				 
			
					operating position
				 
				
					Vertical +/- 10 degree
				 
			
				 
			
					Height
				 
				
					380 mm
				 
			
				 
			
					Width
				 
				
					320 mm
				 
			
				 
			
					Depth
				 
				
					265 mm
				 
			
				 
		
	
					Net weight
				 
				
					18.2 kg
				 
			
		
				 
			
					Electromagnetic compatibility
				 
				
					Conducted and radiated emissions level A conforming to IEC 60947-4-2 
			
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 conforming to IEC 61000-4-2
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
Voltage/current impulse level 3 conforming to IEC 61000-4-5
				
				 
			
					Relative humidity
				 
				
					0…95 % without condensation or dripping water conforming to EN/IEC 60068-2-3
				 
			
				 
			
					Ambient air temperature for operation
				 
				
					40…60 °C (with current derating of 2 % per °C) 
			
-10…40 °C (without derating)
				
				 
			
					Ambient air temperature for storage
				 
				
					-25…70 °C
				 
			
				 
		
	
					Operating altitude
				 
				
					<= 1000 m without derating 
			
> 1000...2000 m with current derating of 2.2 % per additional 100 m