SIEMENS MODULE 6GK7243-5DX30-0XE0

SIEMENS COMMUNICATION MODULE 6GK7243-5DX30-0XE0  
Delivery period: 3 days
WS 


Specific parameters of rectifier device are as follows:


1. Basic rectifier device: the basic rectifier device is applicable to the situation where no energy is required to feed back to the grid.
The basic rectifier device is equipped with the following standard interfaces:
1 set of input power connections
1 set of DC 24 V power interface
1 set of DC busbar (DCP, DCN) for power supply of inverter
1 set of DC bus bars (DCPA, DCNA) for connecting the braking device
3 DRIVE-CLiQ sockets
1 channel temperature sensor input (KTY84-130, PTC or Pt100)
1 PE/protective conductor interface
Let's see how the three-line control mode works.
1. 3-wire control mode: P0727=2, set P700=2, P0701=2, P0702=12, P703=1,


Note here that the stop signal should always be 1. When the forward start pulse signal is given (the input of DI1 changes from 0 to 1 and then changes to 0), the motor is turning to the set frequency (P1040). When the reverse start pulse signal is given (the input of DI2 changes from 0 to 1 and then changes to 0), the motor will slow down and stop and then reverse to the set frequency. When the stop signal changes to 0 (the input of DI3 changes from 1 to 0), the motor will stop