| Model | B | D1 | D2 | D3 | H1 | H2 | H3 | L1 | L2 |
| G6 | 28 | 19.3 | 30 | M10X1 G1/8" NPT1/8" | 14 | 59.3 | 64.8 | 26 | 48 |
| G8 | 28 | 19.3 | 30 | M14X1.5 G1/4" NPT1/4" | 14 | 61.3 | 67.9 | 28 | 54 |
| G10 | 28 | 19.3 | 30 | M18X1.5 G3/8" NPT3/8" | 14 | 61.5 | 67.5 | 28 | 54 |
| G12 | 38 | 24.2 | 37 | M22X1.5 G1/2" NPT1/2" | 19 | 78.1 | 86.5 | 34 | 68 |
| G16 | 38 | 24.2 | 37 | M27X2 G3/4" NPT3/4" | 19 | 78.1 | 86.5 | 39 | 78 |
| G20 | 48 | 35 | 48 | M33X2 G1" NPT1" | 24 | 102.3 | 114.4 | 45.8 | 92 |
| G25 | 60 | 50 | 48 | M42X2 G1 1/4" NPT1/4" | 30 | 134.68 | 148.1 | 57 | 114 |
| G30 | 70 | 70 | 80 | M48X2 G1 1/2" NPT1/2" | 35 | 161.5 | 181.5 | 61 | 122 |
| G40 | 90 | 71 | 80 | M60X2 G2" NPT2" | 45 | 171.5 | 191.5 | 61 | 122 |
| Specification | 6 | 8 | 10 | 12 | 16 | 20 | 25 | 30 | 40 | |
| Max. working pressure | (MPa) | 31.5 | ||||||||
| Max. Flow | (L/min) | 14 | 40 | 60 | 85 | 175 | 200 | 300 | 400 | 600 |
| Hydraulic fluid | Mineral oil;phosphate-ester | |||||||||
| Fluid temp | (℃) | -20~70 | ||||||||
| Viscosity | (mm²/s) | 2.8~380 | ||||||||
| Cleanliness |
The maximum allowable cleanliness of the oil should be according to 9th degree of Standard NAS 1638.It is suggested that the minimum filter rating should be β 10 ≥75.
|
|||||||||
