150WQ-130-30-22 WQ sewage pump sewage pump sand pump mud pump           

    Product outline: The automatic mixing sewage pump is based on the ordinary sewage pump. The device rotates with the motor shaft and produces strong stirring force. The sediment in the sewage tank is stirred into suspended substance and discharged from the suction pump. The anti-blockage and sewage discharge capacity of the pump is improved, and the drainage and clean-up are completed at one time. In addition to silting and saving operation cost, it is an environmentally friendly product with obvious advanced nature and practicability.          The hydraulic performance of JYWQ automatic mixing sewage pump is advanced and mature, and its performance index has reached or exceeded the advanced technology level of similar products abroad.           

    Product characteristics:            

1. The unique double-channel non-blocking impeller structure is adopted to improve the discharge capacity and sewage discharge capacity of sewage.            

2. Automatic stirring device produces strong stirring force, stirring sediment into suspended substance in the tank, then sucking and discharging impeller, so as to achieve the function of clearing silt.           

 3, the partition will be divided into two parts, stirring and influent will not affect each other.           

 4. The mechanical seal is a double-end mechanical seal, which is in the oil chamber for a long time to ensure the safe and reliable operation of the pump.            

5. The hydrodynamic seal of the auxiliary impeller structure can protect the mechanical seal, balance the axial force and prolong the service life of the bearing.           

 6. There is a leak detection probe in the connection chamber of the pump. When the leakage occurs, the probe sends out a signal and the control system protects the pump. The company can be equipped with automatic safety protection control cabinet.           

 7. The stator of the motor is insulated at B and F levels, and the thermal protector is built in. When the motor is overloaded and heated, the protector acts in time to protect the pump and motor.           

 8. Oil and water probes are installed in the oil chamber. When the mechanical seal is damaged, water enters the oil chamber and the probes send out signals. The control system protects the pump.            

9, JYWQ with internal circulating cooling system, to ensure that the pump in the pool * * low water level normal work