ADH-3/8 ADH-6/8 ADH10/8 ADH20/8 ADH30/8 ADH40/8 ADH-60/8 ADH
Promulgator
：admin Time：2016-12-11
ADH-3/8
ADH-6/8
ADH10/8
ADH20/8
ADH30/8
ADH40/8
ADH-60/8
ADH-80/8
ADH-100/8
ADH-150/8
ADH-200/8
Working Principle：
Micro-heat
regeneration air dryer is designed by integrating the advantages of heat
regeneration and non-heated regeneration. After raising the temperature, the
regenerated gas can regenerate the drying agent, which can not only improve the
effect of regeneration, but also reduce the regeneration gas
consumption.
Technical
Features：
Less regeneration gas consumption and low energy consumption;
The finished gas has stable dew point;
It is controlled by micro-computer and the operation state of the equipment can
be real-time display on LCD and LED;
It has functions of diagnosis, alarming and automatic troubleshooting for
several failures;
Heating control adopts non-contact solid state switch and the temperature
overshooting is small with long service life;
If the micro-heat operation mode fails, it can switch to non-heated operation
mode automatically (national patented technology);
It has the function of online parameter modification and protection;
The online dew point control function with the national patented technology can
save energy at the uttermost (optional);
RS485/RS232 communication interface and joint control function are
optional.
Technical
Indexes
·Rated
Gas Processing Volume: 1~500Nm3/min
·Working
Pressure: 0.6-0.8MPa (0.8-3.0MPa available)
·Dew
Point of the Finished Gas: ≤-40℃ or -52℃
·Inlet
Temperature: < 38℃
·Ambient
Temperature: 38℃
·Regeneration
Gas Consumption: ≤6%
·Pressure
Loss: ≤ 0.02MPa
