Truck-Mounted Drilling Rig: ZJ 10 ZJ 15 ZJ 20 ZJ 30 ZJ 40_XIAN HEDELE ENERGY|honghua,kerui,bomco,rosshill agent,tsc,sjpetro,ejpetro,highland ZJ20-ZJ90DB,drawwork mudpump top drive workover,drilling rig,parts,,china

Company Info

Customer Service

Contact Us
FAQ Center
VIP Club

Payment & Shipment

Payment Methods
Shipment
Dropship

Company Policies

Truck-Mounted Drilling Rig: ZJ 10 ZJ 15 ZJ 20 ZJ 30 ZJ 40
Promulgator ：admin Time：2016-07-12

1.Truck-Mounted Drilling Rig: ZJ 10 ZJ 15 ZJ 20 ZJ 30 ZJ 40

Brief Introduction:

1. Integral rotation type adopts hydraulic and machinery driving, realizes the stepless speed for the workover device and substructure model of carrier; Caterpillar motor matched with Allision transmission is reasonable ,safe ,high efficiency, steady and increases the power ratio of motor.

2. Drilling and workover equipments are equipped on the carrier increases the movability of equipment, shortens the installation readiness time of rigs and raises the efficiency of drilling.

3. Integral hydraulic air driving operation system and double crown block saver have worker’s intensity labor relieved and raise the operation safety.

4. Adopting integral forging brake drum ,force internal recycle cooling, raise the braking safety and service life and is favor of protecting the environment

5. Air and flameout protection device and galloping protection device satisfy the special requirements in oil and gas well.

6. Driving self-propelled floor with 14X 8 of load capacity adopts power steering system so that the rig has good trafficability characteristic and cross-country ability.

7. The transmission box of rotary table can realize forward gear and reverse gear ,adopts kinds of drilling rod button of circling operation. Reactive torque release device guarantees that during the drilling course drilling rod deformation will be able to release safely.

8. The truck-mounted drilling rig is designed and manufactured in accordance with API and HSE standard and meet the international bid requirements

Truck-Mounted Drilling Rig: ZJ20

Truck-Mounted Drilling Rig: ZJ30

Truck-Mounted Drilling Rig: ZJ30-40

Technical parameter：

Model	ZJ10/1125CZ	ZJ15/1350CZ	ZJ20/1470CZ	ZJ30/1700CZ	ZJ40/2250CZ
Drilling depth m (ft) (4-1/2”DP)	1000(3280)	1500(4920)	2000(6560)	3000(9840)	4000(13120)
Well servicing depth: m(ft) (3-1/2”DP)	3500(11483)	4000(13123)	5500(18045)	6500(21325)	7500(24606)
Max.hook load:KN(lb)	1125(253000)	1350(303696)	1470(330700)	1700(381260)	2250(505800)
Wireline diameter mm(in)number	￠26(1”)/8		￠29(1-1/8”)/8		￠32(1-1/4”)/10
Max.hook lifting speed m/s(ft/s)	1.23(4)	1.33(4.36)	1.31(4.3)	1.36(4.46)	1.36(4.46)
Moving dimensions (including derrick)m:(ft)	17.5×3.1×4.18 (57.4×10.17×13.7)	19.6×2.9×4.3 (64.3×9.5×13.8)	20.13×3.2×4.4 (66×10.5×14.44)	21.25×3.3×4.47 (69.7×10.8×14.67)	22.45×3.3×4.48 (73.65×10.8×14.7)
Weight :kg(lb)	42000(92590)	51000(112430)	56000(123456)	76000(167548)	82000(180776)
Power system	CAT3406C	CAT3408	CAT3412	CAT3406C	CAT C-16
Engine power :KW(hp)(2100r/min)	343(460)	354(480)	485(650)	343×2 (460×2)	448×2(660×2)
Model of hydraulic transmission	ALLISON-S5600DB	ALLISON-S5600HR	ALLISON-S6610HR	ALLISON-S5600×2	ALLISON-S6610×2
Emergency power	select	select	select	——	——
Classis driven	10×8(8×8)	10×8	12×8	14×8	14×10
Min.turning radius:m(ft)	34(111.55)	34(111.55)	36(118.11)	42(137.8)	44(144)
Min.ground clearance : mm/in	340/13.39
Drawworks	Double drum(single drum)
Drawworks power:hp	450	550	650	750	1000
Diameter of main drum diameter×length mm(in)	￠429×965(￠16.9×38)		￠480×914.5(￠18.9×36)		￠635×1254 (￠25×49.4)
Main brake	Belt type(disc type can be chosen)				Hydraulic disc
Auxiliary brake	WCB224(air cooling brake can be chosen)			WCB324 disc brake	WCB224 disc brake(new)
Drawworks lifting shifts	Five forward one reverse
Derrick model(double sections extension mast)	JJ119/33.1-W	JJ135/34-W	JJ155/35-W	JJ180/36-W /JJ180/38-W	JJ225/39-W
Derrick height m(ft)	31.3(102.69)	34(111.55)	35(114.83)	36(118.11) /38(124.6)	39(127.92)
Racking platform height m(ft)	19.7/20.7(55.77/64.6)	20/21.5(65.62/70.54)	20/21.5(65.6/70.54)	20.4(66.9)	20.4(66.9)
Wind speed km/h(kn)	110(60)
Lighting system	24V/220V/380V(China)
Rated pressure of hydraulic/air MPa(psi)	14/0.833-0.93(2002/119.12-133)
Rig floor	ZT1470/3.7-S telescopic type	ZT1470/4.5-S telescopic type	ZT1690/4.5-Z fold type	ZT2250/5-Z fold type	ZT3000/6.7-Z fold type
Rotary table	ZP175(ZP105)	ZP175	ZP175	ZP205	ZP275
Traveling block/hook	YG150	YG150	YG150	YG170	YG225
Swivel	SL120	SL135(SL160)	SL160	SL225

2.Workover rig

2.1.XJ1000 Workover rig

Products features
◆ 118.11 ft ( 36m ) double section mast made of reinforced square pipes, is hydraulically raised and telescoped.
◆ 14×8 reinforced self-propelled chassis.
◆ Unique compound box, high efficiency easy operation. Two engines can work together, or independently.
◆ Eaton air-controlled water-cooled disc auxiliary brake.
◆ 5 forward 5 reverse speeds rotary drives equipped with torque release device.
◆ It can be used for both workover and shallow well drilling operations.

XJ1000 Workover rig

Technical parameter：

Item	Model	XJ1000
1	Service depth（2-7/8″UE tubing）ft（m）
2	Workover depth（2-7/8″drilling pipe）ft（m）	26247（8000）
3	（3-1/2″drilling pipe）ft（m）	21326（6500）
4	（4-1/2″drilling pipe）ft（m）	16404 (5000)
5	Nominal hook load lb（kn）	337200（1500）
6	Max.hook load lb（kn）	382160（1700）
7	Wireline dia/effective line in（mm）/n	Φ1.13（Φ29）/8
8	Max.lifting speed of hook ft/s（m/s）	4.462（1.36）
9	Overall dimensions in traveling conditionft（m）	69.72×10.83×14.67(21.25×3.3×4.47)
10	Weight lb(kg)	154323 (70000)
11	Power system	CAT-3406C×2/C15
12	Engine power hp（kw）（2100r/min）	460×2(343×2)/540(402)×2
13	Hydraulic transmission	S5600HR×2
14	Chassis driving type	14×8
15	Min.turning diameter ft（m）	137.80 (42)
16	Min.ground clearance in（mm）	13.39 (340)
17	Approachg 、departure angle/Max.grade ability	27°/18°/26%
18	Drawworks	Single drum/double drum
19	Drawworks power hp	750
20	Main drum groove Dia×Length in（mm）	Φ20.79×40.98（Φ528×1041）
21	Main drum brake mode	Band
22	Main brake cooling mode	Inside circulating water cooling
23	Main drum auxiliary brake	Enton WCB324
24	Speeds of drawworks	5 forward 1 backward
25	Mast	Double section
26	Mast height ft（m）	118.11 (36)
27	Max. static load lb（kn）	404640 (1800)
28	Max. wind load kts（km/h）	60 (110)
29	Racking platfrom height ft (m)	65.93,72.48 (20.4,22.2)
30	Control/lighting/power system	24V/220V/380V(china)
31	Hydraulic/air pressure system pressure psi（mpa）	14/0.833～0.93(2002/119.12～133)
32	Drill floor	DZ180/6-Z folding
33	Rotary table	ZP205
34	Traveling block	YG180
35	Swivel	SL225

2.2.XJ350 Workover rig

　

Products features

◆ 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped.
◆ 8×8 full drive chassis for XJ350 single-drum rig.
◆ 10×8 chassis for XJ350S double-drum rig.
◆ Simple operation platform hanged on the rear is available.
◆ A rod hanger is available.

XJ350 Workover rig

Technical parameter：

Item	Model	XJ350
1	Service depth（2-7/8″UE tubing）ft（m）	13120 (4000)
2	Workover depth（2-7/8″drilling pipe）ft（m）	10500（3200）
3	（3-1/2″drilling pipe）ft（m）	8530（2600）
4	（4-1/2″drilling pipe）ft（m）
5	Nominal hook load lb（kn）	134880（600）
6	Max.hook load lb（kn）	202320（900）
7	Wireline dia/effective line in（mm）/n	Φ1（Φ26）/6
8	Max.lifting speed of hook ft/s（m/s）	4.33（1.32）
9	Overall dimensions in traveling conditionft（m）	56.43×9.19×13.71 (17.2×2.8×4.18)
10	Weight lb(kg)	83776 (38000)
11	Power system	CAT-3406B/C11
12	Engine power hp（kw）（2100r/min）	360 (269)/385(287)
13	Hydraulic transmission	HD4700 OFS
14	Chassis driving type	8×8/10×8
15	Min.turning diameter ft（m）	98.43 (30)
16	Min.ground clearance in（mm）	13.39 (340)
17	Approachg 、departure angle/Max.grade ability	36°/18°/32%
18	Drawworks	Single drum/double drum
19	Drawworks power hp	350
20	Main drum groove Dia×Length in（mm）	Φ16.89×37.99（Φ429×965）
21	Main drum brake mode	Band
22	Main brake cooling mode	Forced spraying water cooling
23	Main drum auxiliary brake	122 hydromatic brake
24	Speeds of drawworks	5 forward 1 backward
25	Mast	Double section
26	Mast height ft（m）	102.69 (31.3)
27	Max. static load lb（kn）	229296 (1020)
28	Max. wind load kts（km/h）	60 (110)
29	Racking platfrom height ft (m)	55.78,64.63 (17,19)
30	Control/lighting/power system	24V/220V/380V(china)
31	Hydraulic/air pressure system pressure psi（mpa）	14/0.833～0.93(2002/119.12～133)
32	Drill floor	DZ90/2.2-X
33	Rotary table	ZP105
34	Traveling block	YG110
35	Swivel	SL120

2.3.XJ450 Workover rig

　

Products features

◆ 102.69 ft ( 31.3m ) double section mast, hydraulically raised and telescoped.
◆ 10×8 self-propelled chassis.
◆ A hydromatic brake is often used, and Eaton water-cooled brake or air tong brake is also available.
◆ 5 forward 5 reverse speeds rotary drives equipped with torque release device.
◆ Rod hanger is available.

XJ450 Workover rig

Technical parameter：

Item	Model	XJ450
1	Service depth（2-7/8″UE tubing）ft（m）	18045 (5500)
2	Workover depth（2-7/8″drilling pipe）ft（m）	14064（4500）
3	（3-1/2″drilling pipe）ft（m）	11483（3500）
4	（4-1/2″drilling pipe）ft（m）
5	Nominal hook load lb（kn）	220304（980）
6	Max.hook load lb（kn）	252900（1125）
7	Wireline dia/effective line in（mm）/n	Φ1（Φ26）/6
8	Max.lifting speed of hook ft/s（m/s）	4.04（1.23）
9	Overall dimensions in traveling conditionft（m）	57.74×9.51×13.94 (17.6×2.9×4.25)
10	Weight lb(kg)	97003 (44000)
11	Power system	CAT-3406C/C15
12	Engine power hp（kw）（2100r/min）	460 (343)/475(346)
13	Hydraulic transmission	S5610HR
14	Chassis driving type	10×8
15	Min.turning diameter ft（m）	111.55 (34)
16	Min.ground clearance in（mm）	13.39 (340)
17	Approachg 、departure angle/Max.grade ability	36°/18°/32%
18	Drawworks	Single drum/double drum
19	Drawworks power hp	450
20	Main drum groove Dia×Length in（mm）	Φ16.89×37.99（Φ429×965）
21	Main drum brake mode	Band
22	Main brake cooling mode	Forced spraying water cooling
23	Main drum auxiliary brake	22″SR hydromatic brake
24	Speeds of drawworks	5 forward 1 backward
25	Mast	Double section
26	Mast height ft（m）	102.69 (31.3)
27	Max. static load lb（kn）	268636 (1195)
28	Max. wind load kts（km/h）	60 (110)
29	Racking platfrom height ft (m)	55.78,67.91 (17,20.7)
30	Control/lighting/power system	24V/220V/380V(china)
31	Hydraulic/air pressure system pressure psi（mpa）	14/0.833～0.93(2002/119.12～133)
32	Drill floor	DZ135/3.7-S telescoping
33	Rotary table	ZP175
34	Traveling block	YG150
35	Swivel	SL120

2.4.XJ550 Workover rig

　

Products features

◆ 105 ft ( 32m ) double section mast, hydraulically raised and telescoped.
◆ 10×8 self-propelled chassis.
◆ A hydromatic brake is often used, and Eaton water-cooled disc brake or air tong brake is also available.
◆ 5 forward 5 reverse speeds rotary drives equipped with torque release device.
◆ Rod hanger is available.

XJ550 Workover rig

Technical parameter：

Item	Model	XJ550
1	Service depth（2-7/8″UE tubing）ft（m）	22966（7000）
2	Workover depth（2-7/8″drilling pipe）ft（m）	19029 (5800)
3	（3-1/2″drilling pipe）ft（m）	14064（4500）
4	（4-1/2″drilling pipe）ft（m）
5	Nominal hook load lb（kn）	264364（1176）
6	Max.hook load lb（kn）	303480（1350）
7	Wireline dia/effective line in（mm）/n	Φ1（Φ26）/8
8	Max.lifting speed of hook ft/s（m/s）	4.36（1.33）
9	Overall dimensions in traveling conditionft（m）	57.74×9.51×13.94(17.6×2.9×4.25)
10	Weight lb(kg)	99208 (45000)
11	Power system	CAT-3412/C15
12	Engine power hp（kw）（2100r/min）	575 (429)/540(402)
13	Hydraulic transmission	S6610HR
14	Chassis driving type	10×8
15	Min.turning diameter ft（m）	111.55 (34)
16	Min.ground clearance in（mm）	13.39 (340)
17	Approachg 、departure angle/Max.grade ability	36°/18°/32%
18	Drawworks	Single drum/double drum
19	Drawworks power hp	550
20	Main drum groove Dia×Length in（mm）	Φ16.89×37.99（Φ429×965）
21	Main drum brake mode	Band
22	Main brake cooling mode	Forced spraying water cooling
23	Main drum auxiliary brake	22″SR hydromatic brake
24	Speeds of drawworks	5 forward 1 backward
25	Mast	Double section
26	Mast height ft（m）	104.99 (32)
27	Max. static load lb（kn）	303480 (1350)
28	Max. wind load kts（km/h）	60 (110)
29	Racking platfrom height ft (m)	55.78,67.91 (17,20.7)
30	Control/lighting/power system	24V/220V/380V(china)
31	Hydraulic/air pressure system pressure psi（mpa）	14/0.833～0.93(2002/119.12～133)
32	Drill floor	DZ135/4.5-S telescoping
33	Rotary table	ZP175
34	Traveling block	YG150
35	Swivel	SL135

2.5.XJ550 Workover rig

　

Products features

◆ 111.55 ft ( 34m ) double section mast, hydraulically raised and telescoped.
◆ 12×8 self-propelled chassis.
◆ A hydromatic brake is often used, and “Eaton” water-cooled disc brake or air tong brake is also available.
◆ The rotary system is driven by a two-shaft transfer case via a chain of drawworks, or a three-shaft transfer case via a drive line.
◆ 5 forward 5 reverse speeds rotary drives equipped with torque release device.
◆ Can be used for shallow well drilling operation if equipped with relevant parts.
◆ Rod hanger is available.

XJ650 Workover rig

Technical parameter：

Item	Model	XJ650
1	Service depth（2-7/8″UE tubing）ft（m）	27887 (8500)
2	Workover depth（2-7/8″drilling pipe）ft（m）	22966（7000）
3	（3-1/2″drilling pipe）ft（m）	18045（5500）
4	（4-1/2″drilling pipe）ft（m）
5	Nominal hook load lb（kn）	303480（1350）
6	Max.hook load lb（kn）	330456（1470）
7	Wireline dia/effective line in（mm）/n	Φ1.13（Φ29）/8
8	Max.lifting speed of hook ft/s（m/s）	4.3（1.31）
9	Overall dimensions in traveling conditionft（m）	66.04×10.99×14.44(20.13×3.35×4.4)
10	Weight lb(kg)	121254 (55000)
11	Power system	CAT-3412/C18
12	Engine power hp（kw）（2100r/min）	650 (485)/700(521)
13	Hydraulic transmission	S6610HR
14	Chassis driving type	12×8
15	Min.turning diameter ft（m）	118.11 (36)
16	Min.ground clearance in（mm）	13.39 (340)
17	Approachg 、departure angle/Max.grade ability	27°/18°/32%
18	Drawworks	Single drum/double drum
19	Drawworks power hp	650
20	Main drum groove Dia×Length in（mm）	Φ18.9×36（Φ480×914）
21	Main drum brake mode	Band
22	Main brake cooling mode	Inside circulating water cooling
23	Main drum auxiliary brake	202 type hydromatic brake（WCB）
24	Speeds of drawworks	5 forward 1 backward
25	Mast	Double section
26	Mast height ft（m）	111.55 (34)
27	Max. static load lb（kn）	347990 (1548)
28	Max. wind load kts（km/h）	60 (110)
29	Racking platfrom height ft (m)	65.62,70.54 (20,21.5)
30	Control/lighting/power system	24V/220V/380V(china)
31	Hydraulic/air pressure system pressure psi（mpa）	14/0.833～0.93(2002/119.12～133)
32	Drill floor	DZ147/4.5-S telescoping
33	Rotary table	ZP175
34	Traveling block	YG150
35	Swivel	SL160

Next:Принадлежность ролика H7UB.118P
Previous:Oil field piping system

No comment

Company Info

Customer Service

Payment & Shipment

Company Policies

Join us and be the first to know about our latest products and promotions.

Company Info

Customer Service

Payment & Shipment

Company Policies

Order Track