The integrated circuit
*1. Type: CAN bus;
*2. Rated operating voltage: 12V;
3. Maximum bus terminal DC voltage: -8v
4. Maximum instantaneous bus terminal voltage: -150v
5. Minimum transceiver power voltage when extending fan out: Vcc>4.9V;
6. Three working modes: high speed, slope control and preparation;
* 7. Working temperature: - 40 ℃ ~ 85 ℃;
*8. Origin: imported original.
The integrated circuit
*1. Type: quadruple or gate;
*2. Rated working voltage: 5V;
3. Static current :(uA) -40c/0.25,85c/0.75
* 4. Working temperature: - 40 ℃ ~ 85 ℃.
*5. Origin: imported original.
The integrated circuit
*1. Type: differential transceiver;
2. Rated operating voltage Vcc:-0.5 v-7v
3. Continuous voltage range of bus: -15v -+15V;
4. Data input/output voltage -0.3 v-7v;
5. Electrostatic discharge: contact discharge (iec61000-4-2) A,B, gnd.30kv;
* 6. Working temperature: - 40 ℃ ~ 85 ℃.
*7. Origin: imported original.
The integrated circuit
*1. Type: MCU;
*2. Working voltage: 5V, compatible with McU-51;
*3. Flash memory capacity: 4K byte 1000 write erasers. The data remained for 10 years.
4. Full static work: 0hz-24nhz. Three-wire program memory lock.
*5.128*8 bit internal RAM, 32 line programmable I/O port. Two 16-bit timers/counters, five interrupt sources;
6. Idle and power-off mode with low power consumption, in-chip oscillator and clock circuit;
* 7. Working temperature: - 40 ℃ ~ 85 ℃;
*8. Origin: imported original.
resistance
*1. Gold film resistance, resistance value: 1r-1m;
*2. Power: 0.25w-2w;
*3. Accuracy :+/ -1%;
* 4. Working temperature: - 40 ℃ ~ 85 ℃;
5. Temperature coefficient: +/ -50ppm.
resistance
*1. Resistance value: 250R;
*2. Power: 0.25W;
*3. Accuracy :+/ -0.1%;
* 4. Working temperature: - 40 ℃ ~ 85 ℃;
5. Temperature coefficient; + / - 25 PPM.
The power supply
*1. Input voltage: DC24V, output voltage: DC5V double circuit;
*2.2:1 wide voltage input, isolating the positive and negative output of stable voltage;
*3. Power: 2W;
* 4. Working temperature: - 40 ℃ ~ 85 ℃;
5. Isolated voltage: 1500VDC. Sustainable short circuit protection.
The power supply
*1. Input voltage: DC24V, output voltage: DC5V;
*2.2:1 wide voltage input, isolated stable voltage single circuit output;
*3. Power: 3W;
* 4. Working temperature: - 40 ℃ ~ 85 ℃;
5. Isolated voltage: 1500VDC. Sustainable short circuit protection.
The power supply
*1. Input voltage: DC24V, output voltage: DC24V;
*2.2:1 wide voltage input, isolated stable voltage single circuit output;
*3. Power: 15W;
* 4. Working temperature: - 40 ℃ ~ 85 ℃;
5. Isolated voltage: 1500VDC. Sustainable short circuit protection.
connectors
*1. Guide rail mounting terminal;
*2 rated cross section 2.5mm, suitable for 0.08mm -4MM wires;
*3. Rated voltage: 800V;
*4. Rated current: 24A(2.5mm);
5. Connection: IEC/ em60079-6;
6. Working temperature: 25 ℃ ~ 85 ℃.
connectors
*1. Erasure terminal;
*2.10 bits, spacing 9.5mm;
*3. Wire gauge 22-12awg;
*4. Rated voltage: 450V; Rated current: 20A;
5. Working temperature: 25 ℃ ~ 85 ℃.
connectors
*1. Suitable for 1.6MM PCB connection of base plate, 2.54 spacing contact reed;
*2. Suitable wire gauge: awg28-22 #;
3. Rated voltage: 250V AV/DC;
4. The current rating: 3 a. Contact resistance 1000 Ω 0.02 Ω insulation resistance or greater or less
5. Working temperature: 25 ℃ ~ 85 ℃
connectors
* 1.2.54mm spacing, suitable for 1.6MM PCB connection of substrate;
*2. 3 cores of wire;
*3. Suitable wire gauge: awg28-22 #;
4. Rated voltage: 250V AV/DC;
5. Current rating: 3 a. Contact resistance of 0.02 or less Ω acuity 1000 Ω insulation resistance;
6. Working temperature: 25 ℃ ~ 85 ℃.
connectors
* 1.2.54mm spacing, suitable for 1.6MM PCB connection of substrate;
*2. 4 cores of wire;
*3. Suitable wire gauge: awg28-22 #;
4. Rated voltage: 250V AV/DC;
5. Current rating: 3 a. Contact resistance of 0.02 or less Ω acuity 1000 Ω insulation resistance;
6. Working temperature: 25 ℃ ~ 85 ℃.
connectors
*1. Guide rail installation terminal attachment for fixing terminal;
*2. 10MM width, grey.
* 3. The working temperature: 25 ℃ ~ 85 ℃.
capacitance
*1. Capacity: 4700UF;
*2. Rated voltage: 50VDC;
3. Accuracy: +/-20%;
* 4. Working temperature: - 40 ℃ ~ 105 ℃
capacitance
*1. Capacity: 0.1UF;
*2. Rated voltage: 50VDC;
3. Accuracy: +/20%
4. Materials: CBB
* 5. Working temperature: - 40 ℃ ~ 105 ℃.
filter
*1. Rated current: 6A;
*2. Rated voltage: 250VAC;
*3. Working frequency: 50HZ/60HZ;
* 4. The leakage current is less than 0.5 MA, insulation resistance Ω 500 m or more.
5. Working temperature: 25 ℃ ~ 85 ℃.
filter
*1. Rated current: 3A;
*2. Rated voltage: 250VAC;
*3. Working frequency: 50HZ/60HZ;
* 4. The leakage current is less than 0.5 MA. The insulation resistance acuity Ω of 500 m;
5. It has common mode and differential mode insertion loss and has inhibitory effect.
6. Working temperature: 25 ℃ ~ 85 ℃.
switch
* 1. LASO - Q series; 4 groups of normally open and normally closed transition contacts; With the knob.
*2. Rated voltage: 220VAC;
*3. Rated current: 6A/AC.
switch
* 1. LASO - Q series; 2 sets of normally open and normally closed transition contacts; With the knob.
*2. Rated voltage: 220VAC;
*3. Rated current: 6A/AC.
switch
* 1. LASO - Q series; 2 sets of normally open and normally closed transition contacts. Lock with DC12V indicator light, green, button press.
*2. Rated voltage: 220VAC;
*3. Rated current: 6A/AC.
switch
* 1. LAS1Y series; 2 sets of normally open and normally closed transition contacts, with lock DC12V indicator light, green;
*2. Rated voltage: 220VAC;
*3. Rated current: 6A/AC.
switch
* 1. LAS1Y series; 6 sets of normally open contacts with knobs;
*2. Rated voltage: 220VAC;
*3. Rated current: 6A/AC.
Surge suppressor
*1. Rated current: 6A dc;
*2. Rated voltage: 60VDC, 50HZ/60HZ;
*3. Leakage current is less than or equal to 0.5MA;
4. The insulation resistance acuity Ω of 500 m;
*5. Meet iec 61000-4-4/GB/ t17626-1998;
* 6. Working temperature: 25 ℃ ~ 85 ℃.

Next:Принадлежность ролика H7UB.118P
Previous:Atmospheric thickener