YCQ Series vacuum degasser use suction vacuum pump, a negative pressure in the vacuum tank area, the mud under the atmospheric pressure, through the suction tube into the hollow shaft of the rotor, and then by the hollow shaft around the window, was sprayed rejection to the tank wall, due to the collision and separation pulley so that the drilling fluid is separated into a thin layer, immersed in mud bubble breaker, gas escape through the vacuum suction gas-water separator and separation of exhaust gas from the separator trachea discharged into the safety zone, the mud by the impeller is discharged outside of the tank. Based on the main motor first starts the motor associated with the high-speed rotating impeller was state, only mud from the suction tube into the tank, will not be sucked from the discharge pipe, the effective implementation of the gas-liquid separator, filter out impurities to ensure the exhaust pipe is always open.
YCQ Series vacuum degasser technical parameters
model |
YCQ240 |
YCQ270 |
YCQ300 |
YCQ360 |
Capacity m³ / h |
240 |
270 |
300 |
360 |
Main motor power kW |
15 |
22 |
30 |
37 |
Pump power kW |
2.2 |
3 |
4 |
7.5 |
The main tank diameter mm |
700 |
800 |
900 |
1000 |
The degree of vacuum MPa |
-0.030~0.045 |
-0.030~0.050 |
-0.030~0.055 |
-0.040~0.065 |
Degassing efficiency |
≥95% |
≥95% |
≥95% |
≥95% |
Impeller speed r / min |
860 |
870 |
876 |
880 |
Dimensions mm |
1750×850×1500 |
1950×1000×1680 |
2250×1300×1650 |
2400×1500×1500 |
Weight kg |
1200 |
1350 |
1700 |
1800 |