Home » News center » Desander
Desander
      Promulgator ：keler      Time：2016-02-16
Mud Desander also called Desander. It is composed of hydraulic desand hydrocyclone, shale shaker and cyclone pipe. Desander uses centrifugal force to separate. Desander uses centrifugal pump to supply mud, then the mud flow into hydrocyclone along tangent of cyclone, and the mud’s structure was destroyed under the action of centrifugal force. Under the action of gravity, solid particles along the inner wall sink spirally and was discharged from the bottom of cyclone then falls on the following shale shaker, liquid was discharged from the top of the cyclone.
  • Long Life
     
  • Small Separation Point
     
  • Less Blockage
Desander cyclone uses high chromium cast iron or pure polyurethane material, customers can choose independently. We can exchange it with an international brand. 
The cyclone has long lifetime and light weight, and easy to maintain.
High separation ability and wide separation range. It can remove solid particles from 45 um to 1mm.
Cyclone underflow is pressurized umbrella “wet bottom” to quickly discharge the particles in the separation zone, reducing the blocking probability.
TRZQJ Desander Technical Parameters 

Model TRZQJ200S TRZQJ250S TRZQJ300S TRZQJ200 TRZQJ250 TRZQJ300
Capacity ≤528GPM ≤792GPM ≤1056GPM ≤528GPM ≤792GPM ≤1056GPM
Cone Size 8〞 10〞 12〞 8〞 10〞 12〞
Work Pressure 0.15～0.35Mpa
Inlet Size 75～100mm 100～150mm 150～200mm 75～100mm 100～150mm 150～200mm
Outlet Size 125-150mm 150-200mm 200-250mm 125-150mm 150-200mm 200-250mm
Separationg 47-76μm 47-76μm 47-76μm 47-76μm 47-76μm 47-76μm
Screen Area 1.0m ² No Shale Shaker

Design Principles: TR desander is produced by an advanced design, careful engineering, quality materials and finest workmanship which comprising 8, 10, and 12 inches cone diameter. As desanders have varying capacity based on its diameter. 

Operation Mechanism: Desander include two 12-inch(305-mm) diameter polyurethane hydroclones slant mounted over the shaker. Each desander clone includes four replaceable wear resistant polyurethane sections that are joined together with quick release stainless steel clamps. The desander is furnished with an 8-inch(203-mm) diameter feed manifold and a 10-inch (254-mm) diameter discharge manifold and a 0-60 psi (4.1-bar) pressure gauge. The desander also includes a solids discharge trough to distribute the hydroclone underflow evenly onto the screening surface.

TR is a professional manufacturer of solid control equipment in china. We will provide our clients high quality products with most reasonable price, at the same time we also sincerely offer the high level after sales service for any home or abroad clients. You are welcomed to consult or visit us any time.

< /div>
 
No comment
Total 0 records, divided into1 pages. First Prev Next Last
Business time
9:00-22:00
  • Email：support@rig123.com