ZLL(ZXG)
DNC-40-320-PPV-A-KP
delivery time:6 weeks
-
Stroke2 mm ... 2000 mm
-
Piston diameter40 mm
-
Based on standardISO 15552
-
CushioningElastic cushioning rings/plates at both ends
Pneumatic cushioning, adjustable at both ends
-
Mounting positionoptional
-
DesignPiston
Piston rod
Profile barrel
-
Position detectionVia proximity switch
Without
-
VariantsWith end-position locking on both sides
With end-position locking at rear
With end-position locking at front
Improved running performance
Extended male piston rod thread
Piston rod with female thread
Custom thread on the piston rod
Piston rod with external hexagon
Extended piston rod
Clamping unit on the piston rod
With protection against rotation
High corrosion protection
Dust protection
Uniform, slow movement
Low friction
Through piston rod
Through, hollow piston rod
Heat-resistant seals max. 120°C
Temperature range -40 to 80°C
Monostable valve, mounted on right, unactuated piston rod, retracted
Monostable valve, mounted on right, unactuated piston rod, advanced
Bistable valve, mounted on right, unactuated piston rod, retracted
Monostable valve, mounted on left, unactuated piston rod, retracted
Monostable valve, mounted on left, unactuated piston rod, advanced
Bistable valve, mounted on left, unactuated piston rod, retracted
Piston rod at one end
-
Protection against torque/guideSquare piston rod
-
Operating pressure0.02 MPa ... 1.2 MPa
-
Operating pressure0.2 bar ... 12 bar
-
Mode of operationDouble-acting
-
CE mark (see declaration of conformity)To EU Explosion Protection Directive (ATEX)
-
CE marking (see declaration of conformity)To UK EX instructions
-
Explosion protectionZone 1 (ATEX)
Zone 1 (UKEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 21 (UKEX)
Zone 22 (ATEX)
-
ATEX category gasII 2G
-
ATEX category dustII 2D
-
Explosion ignition protection type for gasEx h IIC T4 Gb
-
Explosion ignition protection type for dustEx h IIIC T120°C Db
-
Explosion ambient temperature-20°C <= Ta <= +60°C
-
Explosion protection certification outside the EUEPL Db (GB)
EPL Gb (GB)
-
Operating mediumCompressed air to ISO 8573-1:2010 [7:4:4]
-
Note on operating and pilot mediumLubricated operation possible (in which case lubricated operation will always be required)
-
Corrosion resistance class CRC2 - Moderate corrosion stress
3 - high corrosion stress
-
LABS (PWIS) conformityVDMA24364-B1/B2-L
VDMA24364 zone III
-
Ambient temperature-40 °C ... 120 °C
-
Impact energy in end positions0.2 J
-
Max. torque for protection against torsion1.1 Nm
-
Theoretical force at 0.6 MPa (6 bar, 87 psi), return stroke633 N
-
Theoretical force at 0.6 MPa (6 bar, 87 psi), advance stroke633 N ... 754 N
-
Type of mountingVia female thread
With accessories
-
Pneumatic connectionG1/4
-
Note on materialsRoHS-compliant
-
Material coverDie-cast aluminium
Coated
-
Material cylinder barrelWrought aluminium alloy
Smooth anodised