PC11 Gen excitation 0509-7901 ROSSHILL
The main function is to provide a generator field winding excitation current. The board has two rectifier, one bridge
Rectifier, a thyristor rectifier is both automatic switching use.
When the generator is started, use flashing residual magnetism, residual magnetism voltage generator through a diode rectifier PC11
Bridge rectifier and then applied to the excitation coil, so positive feedback when remanence voltage becomes large, so the generator slowly
The output voltage; when up to work when the AC component, then automatically switch to the thyristor, so that by Reed
Magnetic plate 01, 10 pin output to the field winding, the normal operation of power generators, and the voltage value by AC module
Control, the regulator through PC11 practice, so that the generator output to maintain stable 600V.
Note: remanence flashing, by adding Li PC11; flashing after switching to half-controlled thyristor rectifier output excitation
Voltage; the establishment of magnetic field generation; PC11 then trigger the thyristor via AC module output pulse, thereby
For voltage control, AC module detects voltage, PI voltage regulator to achieve closed-loop control.
Contact Information:
Wechat: +86 133 5926 9377
Email: rig123@rig123.com
Skype: liuyongjie67
QQ: 526354062
If you have any questions,pls do not hesitate to contact
us .
Attention: Please kindly leave us your phone number
,and also a full and accurate shipping address.
Remark : please kindly add our email to your "white-list" or sign"important" then you can get our message
successfully every time,like special offer, promotion sale ,technic info , and
so on ,thanks !
