HCM
FL SWITCH 1012NT-2SFP(1249598)
Delivery time:3-5 months
width | 40 mm |
height | 140.4 mm |
depth | 92.4 mm |
Restrictions on use | |
EMC Considerations | EMC: Class A products, see manufacturer's description in Download Center |
Housing material | Reinforced polycarbonate fiber |
aluminum/steel DC01 |
Mounting Type | DIN rail-mounted |
Ethernet(RJ45) | |
Number of interfaces | 12 |
How to connect | RJ45 |
Considerations for connection methods | Auto-negotiation and auto-intersection |
Communication speed | 10/100 MBit/s |
Means of transmission | Ethernet with RJ45 twisted pair |
Transmission distance | 100 m (per segment) |
Signal LEDs | Data Reception, Link State |
Number of channels | 12 (RJ45 port) |
Ethernet (SFP) | |
Number of interfaces | 2 |
How to connect | SFP |
Communication speed | 100/1000 MBit/s (full duplex) |
Means of transmission | Depends on SFP module |
Transmission distance | Up to 40 km (depending on fiber/SFP module used) |
Signal LEDs | Data Reception, Link State |
Number of channels | 2 (SFP port) |
Product Line | switch |
Product Series | Unmanaged Switch 1000 |
MTTF | 64.3 Years (MIL-HDBK-217F standard, 25°C temperature, 100% operating cycle) |
298.8 Years (SN 29500 standard, temperature 25°C, operating cycle 21%) | |
560.1 Years (Telcordia standard, temperature 25°C, operating cycle 21% (5 days a week, 8 hours/day)) | |
Switch function | |
Basic Functions | Unmanaged Switches |
Auto-negotiation | |
Store-and-forward switching mode | |
PROFINET conformity class | Conformance-Class A |
MAC Address Table | 8k |
Status and diagnostic display | LED: US, Link, Operation (Each Port) |
Additional features | 100 BASE-TX/100BASE-FX (IEEE 802.3u) |
Quality of Service (QoS) prioritization (IEEE 802.1p) | |
Low Power Ethernet (IEEE 802.3az) | |
10Base-T (IEEE 802.3) | |
Security Features | |
Basic Functions | Unmanaged Switches |
Auto-negotiation | |
Store-and-forward switching mode |
Communication media | copper |
power | |
Power Supply (DC) | 24 V DC |
Voltage range | 9 V DC ... 32 V DC |
connection | Via COMBICON, conductor cross section up to 2.5 mm² |
Residual ripple | 3.6 VPP (within allowable voltage range) |
Maximum current consumption | 223 mA (approx. 9 V DC) |
Normal current consumption | 125 mA (approx. 24 V DC) |
How to connect | with leg spring connection |
Single-wire connection size | 0.2 mm² ... 2.5 mm² |
Conductor connection size/stranded wire | 0.2 mm² ... 2.5 mm² |
Conductor cross-track size AWG | 24 ... 12 |
Stranded connection cross section, with ferrule, with plastic sleeve | 0.25 mm² ... 2.5 mm² |
Conductor cross-section/stranded wire, with rod terminals, without plastic sleeve | 0.25 mm² ... 2.5 mm² |
Stripping length | 10 mm |
Ambient conditions | |
Degree of protection | IP30 |
Operating ambient temperature | -40 °C ... 75 °C |
Ambient temperature (storage/transportation) | -40 °C ... 85 °C |
altitude | 2000 m (max) |
Permissible humidity (operating) | 5 % ... 95 % (non-condensing) |
Permissible humidity (storage/movement) | 5 % ... 95 % (non-condensing) |
Impact (operating) | 30g (EN 60068-2-27) |
Vibration (motion) | Conforms to IEC 60068-2-6: 5g, 150 Hz |
Barometric pressure (operation) | 79 kPa ... 108 kPa Up to 2000 m above sea level (unrated) |
Pressure (Storage/Move) | 79 kPa ... 108 kPa Up to 2000 m above sea level (unrated) |
Conformance/Certification | |
suitability | CE compliant |
ATEX | II 3 G Ex ec IIC T4 Gc |
EU Type Part Approval Number | UL 21 ATEX 2638X |
IECEx | Ex ec IIC T4 Gc |
IECEx Certificate | IECEx UL 21.0120X |
UL, USA / Canada |
UL 61010-1, UL 61010-2-201 Class I, Div. 2, Groups A, B, C, D, T4 Class I, Zone 2, Group IIC, T4 |